Epoxy Flooring FAQ’s
Residential Epoxy Flooring FAQ’s
Commercial Epoxy Flooring FAQ’s
Epoxy flooring is a hard-wearing coating applied over concrete — designed to protect, seal, and dramatically improve the look of your floor.
It’s commonly used in garages, workshops, sheds and warehouses,— anywhere you want something that looks clean and handles foot or vehicle traffic.
Unlike concrete paint, which is thin and wears off quickly, epoxy forms a thick, durable surface that’s resistant to stains, chemicals, and wear.
We’ll fill cracks and prep the surface properly before laying epoxy, but if the concrete slab moves again (which can happen over time), those cracks might reappear in the coating.
Epoxy makes the surface look and perform better — but it can’t stop the concrete or the ground underneath from shifting.
Having said that epoxy flooring is a very resilient flooring option and for 99% of properties, excessive slab movement & cracking aren’t an issue.
We’ll always talk you through the condition of your floor before the job starts.
We offer two main epoxy finishes — both designed for durability and good looks:
Full Flake:
Our most popular option for residential garages, sheds, and outdoor areas. It creates a textured, high-end look, hides dirt well, and adds grip underfoot.
Single Colour:
A more basic, smooth finish — often used in commercial or industrial spaces where practicality is the priority.
You might’ve seen metallic epoxy floors online — we don’t offer them. They look great, but they’re only suitable for indoor use and don’t hold up as well in Aussie conditions. We stick to the finishes that last.
We’ll bring samples to your onsite consult so you can see them in person, and there’s a visualiser on our website if you want to play around with options beforehand.
It depends on the finish — but we add slip resistance where needed.
In garages or sheds, a flake finish usually provides enough grip by itself. For outdoor or wet areas, we can add extra non-slip additives to keep it safe underfoot.
We can definitely improve it — but there are limits.
If your slab is heavily cracked, pitted, or uneven, some of those imperfections may still show through after coating.
Also, if the concrete was poorly finished and not flat, you may notice waviness or bumps under certain lighting. The gloss topcoat makes the floor more reflective — so things like dips or humps can become more noticeable when light hits the surface at an angle.
Epoxy isn’t a magic fix for a badly laid slab — but it’ll still look way better than bare concrete. We’ll be straight with you during the quoting process so you know exactly what kind of result to expect.
A little — but we keep it smooth and efficient.
We use grinders and vacuums to prep the surface, which can be a bit noisy and dusty. Once that’s done, the rest is pretty quiet.
You’ll need to stay off the floor for the install and curing period — but we’ll work with you to keep disruptions to a minimum.
Epoxy is only as good as the surface it’s stuck to — so prep is everything.
Most garage, shed, and warehouse floors are smooth to the touch, which is a problem because epoxy doesn’t like sticking to smooth surfaces.
Proper surface prep removes that smoothness and creates a profile the epoxy can reliably grip to.
That’s why we diamond grind and shotblast every single floor. It’s well above what 99% of contractors do — but we do it because we know proper prep prevents the majority of epoxy failures.
Grinding opens up the concrete and gives the epoxy something to bond to.
Shotblasting pulls the fine dust out of the pores left behind after grinding — leaving a clean, dust-free surface for maximum adhesion.
We don’t touch acid washing. It’s messy, inconsistent, and risky. One missed patch of residue, and your floor could bubble or peel within days.
Our method is 100% mechanical. No shortcuts. No failures from poor prep.
Thanks to our rapid-cure technology, most floors under 50m² can be completed within a single day and are ready to use the next.
This is much less disruptive than old school epoxy systems which typically require 3 visits to complete and a further 7 days before you can use the space again.
For larger areas, it’ll take a bit longer — usually a couple of days depending on the size, condition of the concrete, and the type of finish you choose.
We’ll give you a clear estimate on job time during your onsite consult so you know exactly what to expect.
Done right and looked after properly, epoxy can last 20+ years. Done on the cheap or by an inexperienced person, it may only a couple of years.
We include a residential 20-year warranty on our full flake epoxy system for things like delamination. Like anything, it comes down to prep, product, and maintenance — and we’ve got you covered on all three.
You can walk on it the next day, and drive on it just 24 hours after we’re done.
That’s one of the big reasons clients choose us — our rapid-cure system means you’re back using the space sooner.
Old-school epoxy systems often need 3 days before foot traffic and up to 7 days before vehicles — ours doesn’t.
We’ll give you clear aftercare instructions so you know exactly when it’s good to go.
Not all epoxy floors are built the same — and most don’t hold up.
Prep Work That Actually Matters
Great epoxy starts with proper prep — and most contractors skip it or half-do it.
We diamond grind and shot blast every floor to maximise adhesion. We don’t roll the dice. We play it safe — because we want you to have a floor that actually lasts.
Rapid Return to Service
Most floors are done in a single day, thanks to our rapid-cure materials from the USA and multiple technicians onsite.
Other systems take 3 visits, slow-cure products, and a week off your space. Ours? Walk on it next day, drive on it 24 hours later.
Industry-Leading Warranty
We offer the longest residential warranty in the industry — 20 years.
We can back that up because we put in the time where it matters: surface prep. Others offer 5–10 years. We double it.
You’re Not Chasing a One-Man Band
We’re not some tapped-out solo tradie who takes a week to reply.
You’ve got access to a dedicated customer service team — so if you’ve got a question, it gets answered. If there’s an issue, it gets handled.
If you’re selling and want to stand out — yes.
A clean, modern garage or workshop can leave a great impression on buyers. It gives the sense that the home has been looked after and adds a “finished” feel to the property.
Compared to other upgrades, epoxy is affordable and makes a big visual impact.
Epoxy is low maintenance — just keep it clean.
Wipe up spills when they happen (especially oil or chemicals)
Sweep or mop it regularly
Avoid dragging sharp objects across it
We also offer professional deep cleaning, but most homeowners can maintain it easily with a mop and mild detergent.
Yes — we include a 20-year warranty on our epoxy systems when they are installed in a residential property.
It covers delamination and adhesion issues, provided the surface is used as intended and looked after.
It doesn’t cover cracks that come back through the slab or damage from neglect, but we’ll always be upfront about what’s covered — and give you a copy of the warranty when you get a quote.
Paint might look OK at first — but it’s thin, doesn’t bond properly, and usually starts peeling under foot traffic, tyres, or even a bit of water.
The biggest issue? Most paint jobs are done with minimal prep, and the concrete’s not porous enough — so the paint just sits on top and eventually flakes off.
Epoxy is a totally different system.
We mechanically prep the floor (grinding and shot blasting) to open the surface and ensure the epoxy actually bonds deep into the concrete — not just onto it.
Then we apply high-build, commercial-grade coatings designed for traffic, impact, and chemical resistance.
Done properly (like we do), epoxy doesn’t just look good — it lasts.
Not really — but like any good trade job, there’s a bit involved.
We use dust-controlled grinders during prep, and we tape up skirting boards and sensitive areas to prevent any overspray. When mixing epoxy, we put down drop sheets to keep things clean.
If you’re going with a flake finish, just know we’re throwing millions of flakes to fully cover the floor — so while we do our best to contain them, you might spot a few flakes floating around the place afterwards.
This is especially true for outdoor areas near garden beds or breezy spots — but we’ll tidy up as best we can before we leave.
It can be — mainly during the prep stage.
Grinding and surface prep make most of the noise, and that’s usually done in the first part of the day. Once that’s out of the way, the coating phase is pretty quiet — apart from the occasional use of a vacuum or leaf blower to keep the area clean between coats.
We’ll always give you a heads-up if noise might be an issue, especially for indoor areas or shared spaces.
Pricing varies depending on the size of the job, prep required, access, and the type of finish you choose.
Most of our jobs fall between $3,500–$10,000.
Keep in mind — not all epoxy floors are created equal. Some contractors cut corners with thin coatings, minimal prep, and cheap products.
We’re at the higher end of the market, because we install premium, long-lasting floors using proper prep methods and commercial-grade materials.
Want an exact figure? Book an onsite consult with our friendly team and we’ll give you a straight-up price — no guesswork.
It might be cheaper upfront — if you follow the DIY instructions (which usually involve minimal surface prep and thin coatings). But that shortcut approach is also why most DIY epoxy jobs fail within a year or two.
If you’re trying to replicate a proper professional finish, you’ll need to hire or buy:
A diamond grinder
A shot blaster
A hand grinder for edges
100% solids epoxy
Flake
100% solids polyaspartic topcoat
Once you’ve bought all that gear, figured out how to use it properly, and managed not to muck it up — you’ll have spent more than it would’ve cost to get us in from the start.
So yeah, DIY can seem cheaper. But doing it properly? Not so much.
Only if it’s exposed to UV light — and even then, it depends on the system.
Plain epoxy floors without UV protection can yellow or discolour over time if they get a lot of sun — like in garages with the roller door left open. That’s just how epoxy reacts to UV.
But we’ve got a solution — a Full Flake Epoxy Floor.
First, the vinyl flake layer, which blocks a lot of the UV exposure.
Then, a UV-stable polyaspartic topcoat that’s made to handle the Aussie sun without breaking down or discolouring.
The bonus? Flake floors don’t just resist yellowing — they also hide dirt, tyre marks, and wear way better than plain coatings. They look better, last longer, and perform under pressure.
Epoxy is tough — but not bulletproof.
With the right prep and professional install (like we do), your floor will handle cars, foot traffic, tools, and general wear without an issue. But like any hard surface, dragging heavy metal, dropping sharp tools, or any other form of abuse can cause scratches or chips over time.
That’s why we recommend our full flake system — 100% solids epoxy, flake & finished with a polyaspartic topcoat — it all adds durability and helps hide marks better than plain finishes.
If damage does happen, most issues can be touched up without replacing the whole floor.
It depends on the system and how it’s being used.
Every floor we do is mechanically ground and shot-blasted to give the coating the best chance to bond. Prep like this is the difference between a floor that lasts and one that fails
.
It’s also worth noting — most epoxy floor issues show up early. If there’s a defect in the materials or workmanship, you’ll usually know within weeks or months — not in year seven. We don’t play games with marketing-based warranties. Our approach is: give you a clear system, do the prep right, and stand behind it honestly.
Very — if they’re done properly.
When you combine the right prep, quality materials, and a solid install, epoxy floors are incredibly durable and built to handle the demands of commercial spaces.
There are a few systems we use depending on what your environment needs:
We’ll help you pick the right system for the space — no guessing, no overkill, just what works for your situation.
It can — but it doesn’t have to.
Epoxy floors can be installed with different levels of slip resistance, depending on how the space is used.
If the area is likely to get wet or deal with spills (think food prep areas, entryways, or wash bays), we’ll recommend a finish that meets the correct slip rating for your environment.
For dry indoor spaces like offices, showrooms or storage areas, a smoother finish is often preferred — it’s easier to clean and gives you more flexibility with maintenance.
Bottom line — we’ll match the grip level to how the space is used, so it’s safe and functional.
It depends on a few key things:
We’ll give you clear timeframes before we start — so you know exactly when you can use the space again.