Concrete Resurfacing FAQ’s
It’s a way to restore old, stained, or cracked concrete without the cost and mess of ripping it up.
We apply a new, hard-wearing coating over the top — think of it like a facelift for your driveway, patio, or footpath. Our most popular finish is a flecked look that mimics exposed aggregate.
It’s important not to confuse concrete resurfacing with concrete paint. Paint is thin and usually starts peeling, flaking, or wearing off pretty quickly. Resurfacing, on the other hand, is much thicker, non-slip, and built to last — especially if you keep it maintained.
It also costs a lot less than tearing out your old slab and starting from scratch.
They might — and here’s why.
There are two types of concrete: concrete that’s cracked… and concrete that will crack. We’ll fill any cracks or damage before resurfacing, but if the ground shifts or the slab moves again (which it often does), those cracks can come back through the coating.
No resurfacing system — or any decorative coating — can stop concrete or the ground beneath it from moving. And for that reason, we don’t provide a warranty on crack repairs.
Ask any concreter and they’ll tell you the same thing — if they can’t guarantee a 100mm slab won’t crack, there’s no way we can guarantee a 3–5mm coating won’t show it.
We’ll be upfront about what to expect during the quote so there are no surprises.
Absolutely.
We’ve got a bunch of colours & combinations. If you’re not sure what will suit your place, we’ll show you samples and help you pick something you’ll be stoked with.
The system is textured from the start, so it already has grip built in — it’s not just a smooth layer on top.
We make sure it looks good and feels safe underfoot — no compromises.
Most projects are completed within 2–3 days, depending on the weather, the size of the job, and what condition the slab’s in.
We’ll walk you through the steps before we begin so you know what to expect.
We warranty the system for 5 years — but that doesn’t mean it only lasts 5 years.
It’s kind of like a car — if you look after it, keep it clean, and follow the maintenance guide we give you, it can last well beyond that.
It’s built to handle heat, sun, rain, cars, foot traffic — the whole lot. We’ll also give you simple tips to keep it looking fresh for years to come.
You can walk on the surface a few hours after the final sealer coat — once it’s fully dry.
For driveways or any area with vehicle traffic, you’ll need to wait 7 full days after we finish for the resurfacing to fully cure before driving on it.
For a standard driveway, plan to have your car parked elsewhere for around 9–10 days total — that includes 2–3 days for us to do the job, and 7 days of curing time.
Not all resurfacing systems are created equal — here’s how ours stands out:
We’ve chosen this system because it looks better, lasts longer, and is easier for you to live with — plain and simple.
In most cases — yes, absolutely. First impressions matter, and resurfacing tired, cracked, or stained concrete can instantly boost your home’s street appeal.
A clean, modern driveway or patio makes the whole property feel better maintained — and that can help buyers feel more confident (and competitive) when they walk through.
It’s a relatively low-cost upgrade that can make a big visual impact — especially compared to ripping up and replacing concrete. If your surface is structurally sound, resurfacing is a smart move before selling.
To keep your surface looking its best — and to maintain your 5-year warranty — a clean and reseal is required at year 3, and it needs to be done by our team.
Outside of that, it’s pretty straightforward:
Look after it, and it’ll stay looking fresh for years.
Yes — we offer a 5-year warranty on our resurfacing system, which covers delamination (where the coating lifts or separates from the concrete).
Cracks or any other repairs carried out to the surface which may fail/appear in the coating over time are not covered under the warranty.
To keep the warranty valid, a clean and reseal by our team is required at year 3. It’s part of keeping the surface protected and looking its best long-term.
We’ll remind you when it’s due — easy as that. For more information contact our team for a copy of the warranty.
Our resurfacing system looks its best when it goes over concrete that’s in decent condition.
If your slab has large cracks, rough patches, or uneven areas from a poor finish, those imperfections might still be visible once the job’s done – we call these repair scars. We’ll patch what we can and do our best to smooth things out — but resurfacing won’t completely hide badly damaged concrete.
That said — it’ll still look a lot better than it does now. Just don’t expect perfection.
We’ll walk you through it all during quoting so you know exactly what kind of result to expect.
A little — but way less than ripping up and replacing your slab.
If we’re resurfacing a driveway or anywhere vehicles go, you’ll need to keep cars off it for the 2–3 days it takes to do the job, plus another 7 days for curing. So plan to park elsewhere for about 9–10 days total.
Low-traffic areas like patios or walkways? You can usually walk on them the next day once the sealer dries.
Our technicians will make sure to communicate with you to ensure your access to the property isn’t hindered too much.
Compared to the mess, hassle, noise, and cost of a full rip-out and re-pour, resurfacing is a much quicker and cleaner option.
That’s a fair question — and a common one.
Paint is thin. It sits on the surface, wears quickly, flakes off under foot or tyre traffic, and usually doesn’t hold up to weather. That’s why it fails.
Resurfacing is a completely different system.
We use a high-build, cement & polymer-based system that bonds to the concrete and creates a much thicker, tougher surface. It’s made to handle vehicles, foot traffic, UV, and the Aussie weather. Plus, we finish it with a professional-grade sealer to lock it in and protect it long term.
Done right (like we do), resurfacing lasts years longer than paint — and looks far better doing it.
Not really — but like any trade job, there’s a bit of dust and overspray involved.
We spray a lot of the coating on, so we take the time to properly mask up walls, windows, garage doors, and anything else that needs protecting.
Once we’re done, we make sure everything’s left clean and tidy — just like we found it (only better looking).
It can be — especially during the prep stage.
Depending on the surface, we might use pressure washers or concrete grinders, which can be noisy. We also run a compressor when applying the coatings, and that can hum along too.
Most of the noise happens in the first day or two. Once the prep’s done, it’s a lot quieter for the rest of the job.
It depends on the job — things like size, the condition of the concrete, prep work needed, and how easy the area is to access all play a part.
Most projects land somewhere between $5,000 and $15,000.
If you want a fixed quote, the best move is to book an onsite consult so we can take a proper look and give you an accurate price — no guesswork.
It can — but it’s pretty tough.
Resurfacing creates a thick, hard-wearing coating that’s built to handle foot traffic, vehicles, heat, and weather. But like any surface, it’s not invincible.
If you drag heavy objects, drop something with force, or expose it to sharp impacts, you may see chips or scratches.
That said, our most popular finish is the flecked look — and that’s not just for style. The contrast in the fleck helps to hide minor damage really well.
We also give you a touch-up pot with your job so you can easily take care of small chips or scrapes — if they bother you.
For the longest-lasting results, resurfacing works best over sound, stable concrete. The system is only as good as the surface it’s stuck to — if the slab underneath is in great shape, the coating will last longer and perform better.
That said, we can resurface rough or weathered concrete — and it still comes up looking significantly better. You just need to know: resurfacing is a decorative coating, not a structural repair. It won’t fix movement, lifting, or serious cracking.
If the concrete is already failing, the coating will follow suit eventually. So the more problematic the surface, the shorter the lifespan you should expect.
We’ll assess your concrete during the quote and give you a straight answer on what result you can expect — no false promises.
It really comes down to three things:
The condition of the existing concrete
How long you plan to stay at the property
And how much you’re prepared to spend
If the slab has major cracking, movement, or structural issues, and you plan to live there long term, then a rip-up and re-lay might be the better investment. It’s a more expensive option, but it gives you a fresh start with a structurally sound slab that’ll last decades.
On the other hand, if you’re prepping the home for sale or just want to improve the look without a huge spend, resurfacing makes a lot more sense. You’ll still get a clean, modern finish — and a serious boost to curb appeal — for a fraction of the cost.
We’ll give you our honest opinion when we inspect the job. If we think your concrete isn’t worth resurfacing, we’ll tell you.